Unallocated Laptop battery can be a problem which means where Laptops cannot be run using this battery power supply, sake that inevitably direct using the AC adapter which is not recommended for long-term use. Laptop battery does not charge this there are many skyrocket, both problems on the side of the adapter, the laptop itself, on the power socket, and was himself. In this article will be discussed about how to troubleshoot Laptop Battery Charging. Happy reading.
1. turn off the Laptop
Langkau first to overcome baterei laptops do not fill is to turn off the Laptop, and off the unit by opening the laptop from baterei locks at the bottom of the laptop, as well as removing the laptop AC adapter if it is still connected to the laptop. Then let the condition of the laptop without baterei and adapter connected for approximately 10 to 30 seconds. Then turn it on again by pressing the power button the laptop a bit long for approximately 30 seconds. This way can usually be used to enable back the laptop device does not charge chess power to unit batereinya.
2. allow to cool Baterei
If the temperature of the battery the laptop gets hot, of course this can only interfere with the process of charging an electric current from the power supply unit or the adapter the laptop to laptop baterei units, and surely this would potentially cause problems to the mechanism of charging power supply in cell Baterei laptop itself. For that we need to perform the procedure turn off the laptop with a span of somewhat longer in order to cool the baterei approximately 5-10 minutes.
Cleaning grilles from dust on the fan which is located beside the body of the laptop also needs to be done from the outside, and if possible laptop disassembly can be done, because of dust sticking or menumpul in laptop fan will potentially cause the flow of heat that will spread to the berbagarai other elrktronik of the laptop itself, was no exception on the component baterei as this one.
3. Do the cleaning connector baterei and motherboard
Do the release unit battery from the laptop and then doing cleanup on existing baterei connectors, using a pencil eraser is also commonly used to clean pin RAM or memory, because the pins or connectors that dirty baterei can charging or hamper the conduction of electric current from the power supply unit to the unit baterei as well the flow of electricity from the unit to the unit baterei laptop, so make sure the pins or connectors from baterei laptop clean and free from dust and dirt blackened at pinnya.
Cleanup on the pins on the motherboard baterei can also be carried out if it is possible, using the eraser of a pencil that was done carefully so as not to damage the pins. After checking it by putting up baterei and turn on the laptop again.
4. turn on the laptop without battery
Turn off the laptop and off baterei, then restart the laptop. If the laptop tidakmenyala the likelihood of damage occurring in the adapter or adapter cable. But if the laptop is turned on, the possibility of problems occurring at baterei laptop itself, or a problem in charging IC power in power supply.
5. Examination of the Physical Adapter Cable
The examination covers the physical condition of the cable adapter, such as swirls or Protuberance that appears on the cable, cable keruskaan like former charred signifying heat on cable, and the physical condition of the ugly wires. It could make the issue of charging to baterei occurs. Replace with new baterei if where the problem occurs.
6. Check Baterei Laptop
Baterei off, and clean the dust or kororan stuck in baterei, check also full well baterei voltage, and while almost running out, check the voltage using a multimeter. Baterei good should have a tengangan that is still in accordance with the description in the body of its own, with baterei toletansi a very small voltage.
If the result very much, such as having tested the voltage is at number 6 V, but in the body of the description specified battery 9V battery dipastika, it can be problematic and its working voltage is not qualified.
7. check the adapter
After conducting checks on batteries, checking against the adapter itself. The checking can be done by observing the working voltage of the adapter listed in the body of the adaptor and do testing by using a multimeter. If the result is the actual voltage at values far away, certainly the adapter has a problem or is damaged. Damage can occur due to the ada
pter never slammed, solderan damaged, the transformer in adapter problem.
If the voltage is normal, do some checking also on cable adapter, ensure the adapter is not spiral or any part protruding wires which indicates the problematic and potentially cable konsleting.
Following his checking on the part of the connector on the adapter or the adapter slot in a laptop, make sure both are no problem and is functioning normally.
8. Install your Drivers Baterei
Troubled or corrupt drivers can make the hardware work be not optimal baterei no exception or system power. As for how to reinstall drivers baterei are:
Click the Start menu > right-click the icon My Computer, and click Manage
In Computer Manager dialog box, in the left pane click Device Manager
In the right pane, locate the Batteries section, right click on the entry "Microsoft ACPI-Compliant Control Method battery", and click Uninstall
Click the toolbar on Scan for Hardware Changes, or can be done by clicking the Action menu, and click Scan for Hardware Changes
Do reinstall Drivers wait until the process is completed and restart the Laptop to check the result.
Says baterei reviews about how to troubleshoot a laptop, of course, do not fill above tips tailored to conditions baterei and also the problem. Because of the problems that plagued baterei readers certainly vary, please be traced from troubleshooting the most accessible to the most high.
No comments:
Post a Comment